Pyeong & Korean Unit Converter

28 pyeong in ㎡: 92.56 ㎡

28 pyeong is 92.56 ㎡ or 996.33 ft² (using 1 pyeong = 400/121 ㎡). With the shortened 3.3 ㎡ per pyeong the figure is 92.40 ㎡.

For reference only. Contracts and official documents use legal units such as ㎡ — verify there.

Converted values

28 pyeong in other units
UnitValue
㎡ (exact conversion)92.56
㎡ (shortcut, 1 pyeong = 3.3 ㎡)92.40
ft²996.33

Depth for a given width

For a rectangular space of 28 pyeong, this shows the depth that goes with each width. It is a plain calculation that ignores wall thickness and layout.

Width and depth combinations for 28 pyeong (metres)
Width (m)Depth (m)
423.14
518.51
615.43
811.57

Reading this size correctly

The exact conversion is 1 pyeong = 400/121 ㎡. 28 pyeong is 92.56 ㎡, and the 3.3 ㎡ shortcut gives 92.40 ㎡, a slightly different figure. Which one is used can change the first decimal place.

The pyeong type in a listing usually means the supply area expressed in pyeong, and the exclusive area is smaller. Contracts and registers state ㎡, so treat pyeong as a reference only.

How it is calculated

The formula for pyeong to square metres is pyeong x 400 / 121. For 28 pyeong that means 28 x 400 / 121, rounded to two decimals, which gives 92.56 ㎡. This is the same as saying 1 pyeong is about 3.3058 ㎡.

For square feet the ㎡ value is divided by the square of 0.3048, the exact length of one foot in metres. Following the same steps, 28 pyeong is 996.33 ft². Use this figure when a foreign property site or a design file lists areas in ft².

Every number on this page is computed as an exact fraction and rounded only once at the end, so no error builds up from intermediate rounding.

Nearby sizes

Nearby sizes in ㎡
Pyeong㎡
2685.95
2789.26
2892.56
2995.87
3099.17

Convert your own numbers in the converter