Pyeong & Korean Unit Converter

Convert ㎡, pyeong and ft², work out an area from width × depth, and convert traditional Korean units such as don, geun, doe, mal and majigi. Everything is calculated in this browser and nothing is stored.

Type a number, or paste one with its unit such as 84.97㎡ or 25평. A comma is a thousands separator when groups have three digits (1,234) and a decimal point otherwise (1,5).

Enter a value to see the result.

Display settings

Formulas: 1 pyeong = 400/121 ㎡ (about 3.3058 ㎡), 1 ㎡ = 0.3025 pyeong, 1 ft² = 0.09290304 ㎡. Fractions are used throughout, so rounding error does not build up.

For reference only. Contracts and official documents use legal units such as ㎡ — verify there.

How to use it

㎡ ↔ pyeong ↔ ft²
Enter any one of ㎡, pyeong or ft² and the other two appear together. Changing the unit reads the same number in that unit and calculates again.
Width × depth
Give two side lengths in m, cm, mm or ft to see the area in ㎡, pyeong and ft². It suits measurements taken from a plan or a tape measure.
Traditional units
Convert gold and herb weights (don, nyang, gwan), grain volumes (hop, doe, mal, seom) and farmland area (majigi) within the same kind. For geun and majigi you can pick the basis.

Pyeong and ㎡ at a glance

Common sizes in pyeong with ㎡ and ft² (exact conversion, two decimals)
Pyeong㎡ft²
1033.06355.83
1549.59533.75
1859.50640.50
2066.12711.66
2582.64889.58
3099.171,067.50
34112.401,209.83
40132.231,423.33
50165.291,779.16
60198.352,134.99
Floor areas often quoted in ㎡, in pyeong (exact conversion, two decimals)
㎡Pyeong
339.98
4914.82
5917.85
7422.39
8425.41
10130.55
11434.49
13540.84

One page per size

A page for every size from 10 to 70 pyeong, with the ㎡ and ft² figures and the depth for several widths.

Definitions and bases

Pyeong
One pyeong is a square 6 cheok on a side. With 1 cheok = 10/33 m, 1 pyeong is 400/121 ㎡, about 3.3058 ㎡. Put the other way, 1 ㎡ is exactly 0.3025 pyeong.
ft²
One foot is exactly 0.3048 m, so 1 ft² is 0.09290304 ㎡ and 1 ㎡ is about 10.7639 ft².
Don, nyang, gwan
1 don is 3.75 g, 1 nyang is 10 don (37.5 g) and 1 gwan is 1,000 don (3.75 kg). They were used for gold and herbal medicine.
Geun
A geun differs by item and region. Some use 600 g (160 don) and others 375 g (a tenth of a gwan), so the basis is selectable and you can enter any other value.
Hop, doe, mal, seom
1 doe is about 1.8039 L, 1 hop is a tenth of a doe, 1 mal is 10 doe (about 18.039 L) and 1 seom is 10 mal (about 180.39 L). Grain weight differs by item, so volume is never turned into weight.
Majigi
The unit comes from the area one mal of seed can sow, so it differs by region and by paddy or dry field. Choose 100, 150, 200 or 300 pyeong, or enter your own.

Exclusive area, supply area and pyeong

A listing name such as "34 pyeong type" usually means the supply area expressed in pyeong, while contracts and registers state areas in ㎡. The exclusive area is the space you actually use inside the unit; the supply area adds shared residential space such as corridors and stairs.

For example an exclusive 84 ㎡ is 25.41 pyeong, yet the same unit is often called a mid-30s pyeong type by supply area. Which area a number refers to differs by complex, so check the ㎡ figure in the sales notice and the contract.

This converter only turns the area you enter into pyeong. It does not turn an exclusive area into a supply area. Pyeong is a customary unit, so rely on ㎡ and other legal units for contracts, registration and official papers.

Worked examples

Frequently asked questions

How many square metres is 25 pyeong?
25 pyeong is 82.64 ㎡, because 1 pyeong is 400/121 ㎡ (about 3.3058 ㎡). The shortened 3.3 ㎡ figure would give 82.5 ㎡.
How many ㎡ is exactly one pyeong?
400/121 ㎡, about 3.3058 ㎡. The familiar 3.3 ㎡ is a shortened approximation. This tool uses the exact value by default and lets you switch to 3.3 ㎡ in the settings.
Can I just multiply ㎡ by 0.3?
The exact figure is ㎡ times 0.3025. Multiplying by 0.3 comes out about 0.8% low: 84 ㎡ would read 25.2 pyeong instead of 25.41.
How many pyeong is an exclusive 84 ㎡?
25.41 pyeong. Listings usually quote the supply area, which gives a larger number.
How many grams is a geun?
There is no single value. You can choose 600 g or 375 g, or type the basis that your seller or item uses.
Why does majigi differ by region?
It comes from the amount of seed sown, so the area depends on the kind of field and local custom. Pick a value between 100 and 300 pyeong or type your own.
Can I use the result in a contract or an official document?
We advise against it. The result is a reference conversion. For contracts, registration and filings, rely on figures written in legal units such as ㎡.

More small tools from SeewolLabs