Pyeong & Korean Unit Converter

35 pyeong in ㎡: 115.70 ㎡

35 pyeong is 115.70 ㎡ or 1,245.41 ft² (using 1 pyeong = 400/121 ㎡). With the shortened 3.3 ㎡ per pyeong the figure is 115.50 ㎡.

For reference only. Contracts and official documents use legal units such as ㎡ — verify there.

Converted values

35 pyeong in other units
UnitValue
㎡ (exact conversion)115.70
㎡ (shortcut, 1 pyeong = 3.3 ㎡)115.50
ft²1,245.41

Depth for a given width

For a rectangular space of 35 pyeong, this shows the depth that goes with each width. It is a plain calculation that ignores wall thickness and layout.

Width and depth combinations for 35 pyeong (metres)
Width (m)Depth (m)
428.93
523.14
619.28
814.46

Reading this size correctly

The exact conversion is 1 pyeong = 400/121 ㎡. 35 pyeong is 115.70 ㎡, and the 3.3 ㎡ shortcut gives 115.50 ㎡, a slightly different figure. Which one is used can change the first decimal place.

The pyeong type in a listing usually means the supply area expressed in pyeong, and the exclusive area is smaller. Contracts and registers state ㎡, so treat pyeong as a reference only.

How it is calculated

The formula for pyeong to square metres is pyeong x 400 / 121. For 35 pyeong that means 35 x 400 / 121, rounded to two decimals, which gives 115.70 ㎡. This is the same as saying 1 pyeong is about 3.3058 ㎡.

For square feet the ㎡ value is divided by the square of 0.3048, the exact length of one foot in metres. Following the same steps, 35 pyeong is 1,245.41 ft². Use this figure when a foreign property site or a design file lists areas in ft².

Every number on this page is computed as an exact fraction and rounded only once at the end, so no error builds up from intermediate rounding.

Nearby sizes

Nearby sizes in ㎡
Pyeong㎡
33109.09
34112.40
35115.70
36119.01
37122.31

Convert your own numbers in the converter