Pyeong & Korean Unit Converter
49 pyeong in ㎡: 161.98 ㎡
49 pyeong is 161.98 ㎡ or 1,743.58 ft² (using 1 pyeong = 400/121 ㎡). With the shortened 3.3 ㎡ per pyeong the figure is 161.70 ㎡.
For reference only. Contracts and official documents use legal units such as ㎡ — verify there.
Converted values
| Unit | Value |
|---|---|
| ㎡ (exact conversion) | 161.98 |
| ㎡ (shortcut, 1 pyeong = 3.3 ㎡) | 161.70 |
| ft² | 1,743.58 |
Depth for a given width
For a rectangular space of 49 pyeong, this shows the depth that goes with each width. It is a plain calculation that ignores wall thickness and layout.
| Width (m) | Depth (m) |
|---|---|
| 4 | 40.50 |
| 5 | 32.40 |
| 6 | 27.00 |
| 8 | 20.25 |
Reading this size correctly
The exact conversion is 1 pyeong = 400/121 ㎡. 49 pyeong is 161.98 ㎡, and the 3.3 ㎡ shortcut gives 161.70 ㎡, a slightly different figure. Which one is used can change the first decimal place.
The pyeong type in a listing usually means the supply area expressed in pyeong, and the exclusive area is smaller. Contracts and registers state ㎡, so treat pyeong as a reference only.
How it is calculated
The formula for pyeong to square metres is pyeong x 400 / 121. For 49 pyeong that means 49 x 400 / 121, rounded to two decimals, which gives 161.98 ㎡. This is the same as saying 1 pyeong is about 3.3058 ㎡.
For square feet the ㎡ value is divided by the square of 0.3048, the exact length of one foot in metres. Following the same steps, 49 pyeong is 1,743.58 ft². Use this figure when a foreign property site or a design file lists areas in ft².
Every number on this page is computed as an exact fraction and rounded only once at the end, so no error builds up from intermediate rounding.